DIY LED Auto Lamp

Improve the visibility of your headlights by switching to LED Auto lamps. You can do this project yourself with a socket wrench, screwdriver and a LED Light assembly that corresponds with the make and model of your vehicle.
1 Turn off the vehicle engine and open the hood. Using the socket wrench, disconnect the battery by loosening and removing the negative terminal from the battery post.
2 Disconnect the electrical component of the headlight by squeezing in the plastic tabs on the connector. Pull the electrical connector off the assembly.
3 Remove all nuts and bolts on the LED assembly with a socket wrench or a screwdriver. Pull the vehicle headlight assembly out of the engine compartment once the nuts and bolts are removed.
4 Replace the vehicle assembly with the LED assembly and screw down with the bolts or screws. Reattach the electrical connector.
5 Reconnect the negative terminal to the battery post. Test the LED headlights to make sure they are functioning properly.